Видео

I havent used my pro 100 for 2 years... can I still use it? Do you have any advice how to start using it?

To update, I tried printing my 4x6 from my iPad using the Epson Print Layout Professional Printing app. Printed perfectly.

Another Jose video! For anyone in the comments that has done this before what are your thoughts on physically removing the ink cartridges before you move the printer?

Thank you

I am having the same issue on the ET 8500. If I print with borders they are uneven. If I print borderless it will stretch the image out so that I am losing the edges of the original image. It may be a windows issue since it is doing the same thing with the pro 10 and ET 8500? There is no difference printing through Adobe Acrobat or Photoshop.

You waste way too much time explaining why you waste so much time. Please we come for inmfo or we would not come at all.

Nice video, I have bought one of these and am setting it up, someone told me yesterday that eco tanks printers are terrible for clogging up, I'm hoping they have got better ?

💙💙💙💙💙💙💙👍👍👍👍👍👍👍👍

Very helpful - thanks a lot, Jose!

Coincidentally, I was trying to get this to work with an ET-8550. It printed a little off center from a postcard sheet so once I tore them, there was a thicker border on one edge versus another. It was meant to be centered in Epson Print Layout. I can only assume it's because I used rear feed and it just went off alignment a bit.

This is useful! Could you do a demo on how to do equal boarders with Canon Pro-100 with Photoshop?

Thank you so much José! I could not have figured this out on my own.

This sounds familiar 😄😄. Thank you for sharing this info .

Thank you.

Just want to thank you again for motivating me to print my photos after shooting for 20+ years without printing on my own. Only a 8550 but it's a start

As always, very useful information. I own the 8550 and love it. No issues so far. Thanks Jose!

I know this is not a question about above subject but need an answer. I prefer using my Canon chip resetter on my PGI250XL and CLI251 cartridges (non ARC). But I can't find anymore non Arc cartridges, I read people like them but I prefer the resetter. Will the Canon resetter work on ARC chips? Please let me know, thank you.

Just found my parents’ one from years ago, thank you so much!

can you buy it in europe

Hi Jose, wondering how I can clean my sponges? I do not print borderless but over time sponges have become saturated with ink and they are now staining the back of my larger size prints. Is it just a matter of dabbing the sponges with absorbing paper? I'd love to see a video of how you clean your Pro-1000 sponges including how to move the print head to access all areas. Thank you!

Hi Jose. Just wondering if I can regularly print a nozzle check on my Canon Pro9500 to prevent the printer head from clogging if I have nothing to print over a period of time?

hi Jon, in your storage solution formula in the description, is it Glycerol or Methylene Glycol ? Or it doesn't matter and either can be used?

This is great! 👍🏼 I have a few more questions. Are there any acrylic plates specifically designed for sublimation? The products I have looked at only mention that they are made of acrylic material. Should they be coated with polyester? If there are suitable acrylic plates, where can I find them? Alternatively, how can we print images on acrylic materials that are not suitable for sublimation? Thanks in advance.

Very nice tip 👌 It's on satin matt paper the same?

hi Jose - really appreciate the information you provide, very eye opening on comparing multiple printer outputs. I take it that the Canon Accounting Manger is only working with the Pro 1000 and not older Pro models or maybe I am doing something wrong with my Pro 100 ??

What Matt paper do you recommend

Videos are great! I need help with my pro 1000. My saturation is not at all what it should be. How can I fix this please?

Is the first one totally free? Thanks

Instead of talking too much, show how to do it !!

Hello, I have an Epson ET 2720 - what method do you have for this cleaning? I have a major clog on Cyan. I have tried all kinds of things. I did not use the printer for about 6 months

Thanks Jose! What about Brother printers? The best printers I've ever had were Brothers. Did a contract job for a company a while back and needed my own printer so I could use my own laptop without having to sync up to their network. (They were very concerned about security and I was only going to be there for a few months.) Bought a little $89.00 brother. It copied, printed and scanned better than their fancy $20-30,000 machine. Mine was slower of course. The only thing I ever used theirs for was printing on 11x17. I haven't used it in several years, but may try it out using Jose's tricks.

Your knowledge is deeply appreciated, I now understand where I went wrong earlier in this venture. Thank you so much Jose.

What is the average temperature in your room? Where do you live? By the sea or in the mountains? Humidity?

I have a Canon Pro 300 that just gave me the waste pads are getting full error. It's currently working but after seeing your video on that subject I know there is nothing to do but toss the printer. I bought the 300 after my Pro 10 gave me the dreaded print head error (can't remember the number now). When I got the 300 it was shipped and arrived broke and I had to send it back and take out the ink and the printhead, so when the replacement arrived I had two printheads! One is currently in the 300 and the other is just in storage. I still have the Pro10 that's been out in the shop for about 3 years now with the ink cartridges still installed! My question is, it there anything I should do to resurrect the Pro 10 other that switching the printhead?

Sometimes I get a white line on the end of the bottom half of the print and I’m not sure why? I already checked the alignment. I’m using this exact printer with the Epson premium photo paper and i only get a short white line at the end of every other photo

where do i get the Engineers utility for epson ET-4750?

Hi Jose. Does this RUclips link makes sense to reuse those Maintenance carts ? ruclips.net/video/qeGfYwzLfog/видео.html

Good afternoon I just brought an epsonx15000 I actually im trying to convert it but i poured out all the sublimation ink which was inside the cartridge now i can’t refill the cartridge, the bag is close Please can someone tell me what to do to fix it !?

need Sublimation papper use too ?

8 years on and still of value! The Windex trick worked on my ET-8550 :) THANK YOU

Hello, I just found your channel. I have a question? If printing on transfer paper or transparent paper? What would be a nice printer to go with for quality. Not trying to spend a bunch of money. Mainly making small baseball card size materials. I just know that on my older Epson that uses fluid ink. It did not stick to the transparency paper. But when using a printer that prints from a powder it works fine. I appreciate any feedback from anybody also in the chat. Thanks

yep the live steam starts at midnight here in western australia.

After eight years, I am getting back to printing. I have plenty to learn. I purchased the ET8550 from all the positive reviews and the Tank ink costs. Eight years ago, I had an Epson Stylus Pro 3880. It has not been used for eight years and looks brand new. If I may ask a sidebar question, what is the best way to restart the 3880? I know it will use a lot of ink, but I would like to use it until I can purchase the Epson 5370.

They are the same.

Use original Epson 114 bottled ink (CMY PB and Grey) (for the ET8550) to refill the XP15000 cartridges, so you will have maximum fade resistance. The red can be approximated with 80% magenta + 20% yellow (I don't see any significant difference after profiling), or use Canon bottled G53 RED ink (Canon Chromalife 100+ fade resistance). Aftermarket ink won't match original inks in terms of fade resistance.

where can i find xp-15000 precision ink icc profiles?

I own a 2007 HP Z3100 44”GP Photo printer that fell out of use when the Pandemic hit. Now it’s a piece of trash. Make prints every day. Don’t lose your investment because you forgot.

I have both and hands down 15000.

Cost aside, would OEM inks in the XP15000 be better or worse than third party vs OEM in the 8550 ? In all cases, would we be required to use ICC profiles? And finally, how would the results compare using Epson Premium Luster using Epson’s own profiles?

How do we get icc profile if we use dye sub ink in the 8550?